 |
Generic P/N |
Image |
Product Description |
PDF |
|
|
5632004109
|
 |
4x2x0.6 PVC Unshielded Multi Pairs Thelephone Cable |
|
| Applications: Low-frequency signals for short-range, Indoor & Outdoor use, Telephone line distribution, General Construction: 4 PVC insulated twisted pairs, cabled together, with outer PVC jacket., Outer Jacket Material: UV resistant FR-PVC, Outer Diameter: 7.5mm nom., Weight: 72kg/km, Flamability Rating: IEC 60332-3 |
|
|
9842206101
|
 |
6x2x0.9 Unshielded Direct Burial CAT3 Cable |
|
| Applications: Low-frequency signals for short-range, Indoor & Outdoor use, Direct Burial installation, General Construction: 6 PE insulated twisted pairs, cabled together with water dry blocking elements. The moisture barrier consists of aluminum tape bonded to PE jacket.
The cable conforms to TR 2150A and to transmission requirements of CAT 3 per ANSI/TIA/EIA-568-A for backbone cable., Outer Jacket Material: PE, Outer Diameter: 15.0mm nom., Weight: 175kg/km |
|
|
9842240101
|
|
40x2x0.9 Unshielded Direct Burial CAT3 Cable |
|
| Applications: Low-frequency signals for short-range, Indoor & Outdoor use, Direct Burial installation, General Construction: 40 PE insulated twisted pairs, cabled together with water dry blocking elements. The moisture barrier consists of aluminum tape bonded to PE jacket.
The cable conforms to TR 2150A and to transmission requirements of CAT 3 per ANSI/TIA/EIA-568-A for backbone cable., Outer Jacket Material: PE, Outer Diameter: 28.0mm nom., Weight: 800kg/km |
|
|
T40005•••B
|
 |
5x2x0.4/0.75-B-CE-AP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 5 color coded 0.40mm cellular PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An outer PE jack is extruded over the cable core and a rip cord is applied to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 8mm nom., Weight: 60kg/km |
|
|
T40010•••B
|
 |
10x2x0.4/0.75-B-CE-AP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 10 color coded 0.40mm cellular PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An outer PE jack is extruded over the cable core and a rip cord is applied to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 9mm nom., Weight: 84kg/km |
|
|
T40010•••B
|
|
10x2x0.4/0.75-B-CE-APRP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 10 color coded 0.40mm cellular PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor and an outer PE jacket. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 13.6mm nom., Weight: 180kg/km |
|
|
T40010•••B
|
 |
10x2x0.4/0.75-B-SO-P |
|
| Applications: Outdoor installations, Indoor & Outdoor use, General Construction: 10 color coded 0.4mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. A PE jacket is applied over the cable core.A ripcord is applied under the jacket to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 7.5mm nom., Weight: 53kg/km |
|
|
T40010•••B
|
 |
10x2x0.4/0.75-B-SO-P-SS |
|
| Applications: Outdoor installations, Indoor & Outdoor use, Aerial Installation, General Construction: 10 color coded 0.4mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. An outer PE jacket is simultaneously extruded over the cable core and a self supporting steel messenger wire forming a "Figure-8" shape .A ripcord is applied under the jacket to facilitate removal., Outer Jacket Material: PE, Outer Diameter: mm nom., Weight: 223kg/km |
|
|
T40010•••B
|
|
10x2x0.4/0.75-B-SO-PRP |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 10 color coded 0.40mm PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor and an outer PE jacket. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 12.5mm nom., Weight: 138.5kg/km |
|
|
T40010•••B
|
 |
10x2x0.4/0.75-B-SO-PRP-SS |
|
| Applications: Outdoor installations, Aerial Installation, General Construction: 10 color coded 0.40mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor. An outer PE jacket is simultaneously extruded over the armoring and the self-supporting steel messenger wire forming a "figure-8" shape. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: mm nom., Weight: 310kg/km |
|
|
T40020•••B
|
|
20x2x0.4/0.75-B-CE-AP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 2 units of 10 color coded 0.40mm cellular PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An outer PE jack is extruded over the cable core and a rip cord is applied to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 11mm nom., Weight: 132kg/km |
|
|
T40020•••B
|
|
20x2x0.4/0.75-B-CE-APRP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 2 units of 10 color coded 0.40mm cellular PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor and an outer PE jacket. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 15.6mm nom., Weight: 228.5kg/km |
|
|
T40020•••B
|
|
20x2x0.4/0.75-B-SO-P |
|
| Applications: Outdoor installations, Indoor & Outdoor use, General Construction: 2 units of 10 color coded 0.4mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. A PE jacket is applied over the cable core.A ripcord is applied under the jacket to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 9.2mm nom., Weight: 91kg/km |
|
|
T40020•••B
|
|
20x2x0.4/0.75-B-SO-P-SS |
|
| Applications: Outdoor installations, Indoor & Outdoor use, Aerial Installation, General Construction: 2 units of 10 color coded 0.4mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. An outer PE jacket is simultaneously extruded over the cable core and a self supporting steel messenger wire forming a "Figure-8" shape .A ripcord is applied under the jacket to facilitate removal., Outer Jacket Material: PE, Outer Diameter: mm nom., Weight: 262.5kg/km |
|
|
T40020•••B
|
|
20x2x0.4/0.75-B-SO-PRP |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 2 units of 10 color coded 0.40mm PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor and an outer PE jacket. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 14.6mm nom., Weight: 205.5kg/km |
|
|
T40020•••B
|
|
20x2x0.4/0.75-B-SO-PRP-SS |
|
| Applications: Outdoor installations, Aerial Installation, General Construction: 2 units of 10 color coded 0.40mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor. An outer PE jacket is simultaneously extruded over the armoring and the self-supporting steel messenger wire forming a "figure-8" shape. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: mm nom., Weight: 361kg/km |
|
|
T40025001B
|
|
25x2x0.4/0.75-B-FS-AP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 25 color coded 0.40mm fome skin PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An outer PE jack is extruded over the cable core and a rip cord is applied to facilitate removal.
This cable design per Telcordia (bellcore) GR-421 STANDARD. , Outer Jacket Material: PE, Outer Diameter: 11.9mm nom., Weight: 175kg/km |
|
|
T40030•••B
|
|
30x2x0.4/0.75-B-CE-AP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 3 units of 10 color coded 0.40mm cellular PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An outer PE jack is extruded over the cable core and a rip cord is applied to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 12.1mm nom., Weight: 182kg/km |
|
|
T40030•••B
|
|
30x2x0.4/0.75-B-CE-APRP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 3 units of 10 color coded 0.40mm cellular PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor and an outer PE jacket. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 16.5mm nom., Weight: 310kg/km |
|
|
T40030•••B
|
|
30x2x0.4/0.75-B-SO-P |
|
| Applications: Outdoor installations, Indoor & Outdoor use, General Construction: 3 units of 10 color coded 0.4mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. A PE jacket is applied over the cable core.A ripcord is applied under the jacket to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 11mm nom., Weight: 131kg/km |
|
|
T40030•••B
|
|
30x2x0.4/0.75-B-SO-P-SS |
|
| Applications: Outdoor installations, Indoor & Outdoor use, Aerial Installation, General Construction: 3 units of 10 color coded 0.4mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. An outer PE jacket is simultaneously extruded over the cable core and a self supporting steel messenger wire forming a "Figure-8" shape .A ripcord is applied under the jacket to facilitate removal., Outer Jacket Material: PE, Outer Diameter: mm nom., Weight: 300kg/km |
|
|
T40030•••B
|
|
30x2x0.4/0.75-B-SO-PRP |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 3 units of 10 color coded 0.40mm PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor and an outer PE jacket. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 16.5mm nom., Weight: 295kg/km |
|
|
T40030•••B
|
|
30x2x0.4/0.75-B-SO-PRP-SS |
|
| Applications: Outdoor installations, Aerial Installation, General Construction: 3 units of 10 color coded 0.40mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor. An outer PE jacket is simultaneously extruded over the armoring and the self-supporting steel messenger wire forming a "figure-8" shape. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: mm nom., Weight: 408.5kg/km |
|
|
T40032006L
|
|
32*2*0.4/0.65-TC-PV-C-B-V#S LGY |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 32 color coded 0.4mm PVC insulated pairs are stranded to form the cable core. An aluminum tape shield is longitudinally applied over the cable core. The braid shield is applied over the aluminum tape. An outer PVC jacket is extruded over the cable core. A Ripcord is applied under the cable jacket to facilitate removal., Outer Jacket Material: PVC, Outer Diameter: 8.7mm nom., Weight: 135kg/km |
|
|
T40050•••B
|
|
50x2x0.4/0.75-B-CE-AP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 5 units of 10 color coded 0.40mm cellular PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An outer PE jack is extruded over the cable core and a rip cord is applied to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 14.3mm nom., Weight: 264kg/km |
|
|
T40050•••B
|
|
50x2x0.4/0.75-B-CE-APRP-G |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 5 units of 10 color coded 0.40mm cellular PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape and a longitudinally applied aluminum moisture barrier complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor and an outer PE jacket. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 18.5mm nom., Weight: 402kg/km |
|
|
T40050•••B
|
|
50x2x0.4/0.75-B-SO-P |
|
| Applications: Outdoor installations, Indoor & Outdoor use, General Construction: 5 units of 10 color coded 0.4mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. A PE jacket is applied over the cable core.A ripcord is applied under the jacket to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 13.2mm nom., Weight: 197kg/km |
|
|
T40050•••B
|
|
50x2x0.4/0.75-B-SO-P-SS |
|
| Applications: Outdoor installations, Indoor & Outdoor use, General Construction: 5 units of 10 color coded 0.4mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. An outer PE jacket is simultaneously extruded over the cable core and a self supporting steel messenger wire forming a "Figure-8" shape .A ripcord is applied under the jacket to facilitate removal., Outer Jacket Material: PE, Outer Diameter: mm nom., Weight: 362kg/km |
|
|
T40050•••B
|
|
50x2x0.4/0.75-B-SO-PRP |
|
| Applications: Outdoor installations, Direct Burial installation, General Construction: 5 units of 10 color coded 0.40mm PE insulated pairs are stranded to form the cable core. The interstices are filled with a waterblocking compound. A dielectric binding tape complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor and an outer PE jacket. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: 20.0mm nom., Weight: 360kg/km |
|
|
T40050•••B
|
|
50x2x0.4/0.75-B-SO-PRP-SS |
|
| Applications: Outdoor installations, Aerial Installation, General Construction: 5 units of 10 color coded 0.40mm PE insulated pairs are stranded to form the cable core. A dielectric binding tape complete the core structure. An inner PE jacket is applied and is covered with a corrugated steel armor. An outer PE jacket is simultaneously extruded over the armoring and the self-supporting steel messenger wire forming a "figure-8" shape. Ripcords are applied under the inner and outer jackets to facilitate removal., Outer Jacket Material: PE, Outer Diameter: mm nom., Weight: 501kg/km |
